Filter
Top Products
Dimensions
Units U Depth
mm (inches)
Height
mm (inches)
Approx. Weight
kg (lbs)
8051 Compressor
(AM4851 and AM5292)
not including mains plug
3 500 (20) 135 (5.25) 10.5 (23)
Rack Mounting and Cooling
The rack units should be installed in a 19" cabinet with access to the front and rear.
No specific air conditioning is required for the racks, provided that there is a free flow of air through
the rack from front to back, and that the ambient air is maintained below 30 degrees centigrade.
Therefore the racks may be stacked.
Power Requirements
8051 Units
Rated Voltage 100-250V AC
Rated Frequency 47-63 Hz
Rated Current .25A at 250V
Primary Protection Fuse:
Operating Voltage 250/110V
Fuse Rating and Type T1.6A/T1.6A A/S Ceramic
Location Rear Panel IEC Mains Connector
Mains Supply
The power supply unit is a universal input type therefore no mains operating voltage setting is
required.
The CH (chassis) and 0V are linked externally.
See the rear panel layout for AM4851 & AM5292.
8051 5.1 Compressor User Guide
Issue 2 Page 2