Filter
Top Products
EXT Control
The EXT buttons provide an insert point in the control voltage signal, after the bias control but before
routing back to the channels.
During normal operation the control voltages generated by the sidechain are internally connected
to the CV Link switched for routing back to the channels. In EXT mode the control voltage is taken
from the rear connector instead of the sidechain outputs, allowing the unit to be slaved from a
second 8051 or 33609.
-
There is no EXT Control with 88R(S) console mounted compressors (AM5052 & AM5265).
Pin Function
1 0V Reference
9 CV send, sidechain A
12 Remote power-on
5 CV send, sidechain B
13 CV return, sidechain B
14 CV return, sidechain A
15 24V Reference
Short to pin 12 to pin 1 to take the unit out of standby mode remotely.
8051 5.1 Compressor User Guide
Issue 2 Page 9
PUSHPUSHPUSHPUSHPUSHPUSHPUSH
INPUT1
OUTPUT1OUTPUT2OUTPUT3OUTPUT4OUTPUT5OUTPUT6
INPUT2INPUT3INPUT4INPUT5INPUT6KEYINPUT
CONTROL
VOLTAGEI/O
PLEASESEE
MANUAL
CHASSIS INTERNAL
0V
FUSE1.6AA/SCERAMIC
INPUTVOLTAGE100-250VAC
INPUTFREQUENCY47-63Hz
WARNING
DISCONNECTMAINSLEAD
TOISOLATEUNIT.
NOUSERSERVICEABLE
PARTSINSIDE
HAZARDOUSVOLTAGESINSIDE
REFERTOMANUALS