VLP SERIES SPECS
Power supply: AC 100V, 50/60Hz (Japan)
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada)
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina)
AC 220V, 60Hz (Philippines and Korea)
AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)
AC 240V, 50Hz (Australia and U.K.)
MODEL: VLP 300 VLP 600 VLP 1500
Output Power: 150W RMS per Channel @ 4 Ohms,
300W RMS per Channel @ 4 Ohms, 7500W RMS per Channel @ 4 Ohms,
1kHz, 0.1% THD 1kHz, 0.1% THD 1kHz, 0.1% THD
100W RMS per Channel @ 8 Ohms, 200W RMS per Channel @ 4 Ohms, 500W RMS per Channel @ 4 Ohms,
1kHz, o.1% THD 1kHz, 0.1% THD 1kHz, 0.1% THD
(Bridge Mode, Mono) (Bridge Mode, Mono) (Bridge Mode, Mono)
300W RMS @ 8 Ohms, 600W RMS @ 8 Ohms, 1500W RMS @ 8 Ohms,
1kHz, 1% THD 1kHz, 1% THD 1kHz, 1% THD
Total Harmonic Less Then 0.1% (20Hz - 20kHZ @ Less Then 0.1% (20Hz - 20kHZ @ Less Then 0.1% (20Hz - 20kHZ @
Distortion (THD): 8 Ohms 8 Ohms 8 Ohms
Frequency (+/-01db, @ rated output power, (+/-01db, @ rated output power, (+/-01db, @ rated output power,
Response: 8 Ohms): 20Hz - 20KHz 8 Ohms): 20Hz - 20KHz 8 Ohms): 20Hz - 20KHz
Slew Rate: 15V Per usec 15V Per usec 15V Per use
Damping Factor @ 260 300 300
8 Ohm:
Impedance: 20K Ohms Balanced 20K Ohms Balanced 20K Ohms Balanced
10K Ohms Unbalanced 10K Ohms Unbalanced 10K Ohms Unbalanced
Dimensions 13.25” x 19” x 1.75” 14” x 19” x 3.5” 14” x 19” x 3.5”
(LxWxH): 336 x 482 x 44mm 360 x 482 x 88mm 360 x 482 x 88mm
Weight: 24lbs/11Kgs 33lbs/15Kgs 42lbs/19Kgs
American Audio® - www.americanaudio.com - VLP Series™ Power Amplifier User Manual Page 17