Filter
Top Products
©American Audio® - www.americanaudio.us - DP-2™ Instruction Manual Page 9
its particular player. This function will only work when MIXER OUTPUT (5) is ON.
10. CUE/PGM KNOB - Turning the knob to the all the way to the CUE position (all the way to the left)
will allow you to hear only the CUE signal (headphone signal) only. Turn the knob to the PGM position
(all the way to the right) will allow you to hear the Program signal (main output) only.
11. CUE VOLUME CONTROL - This knob is used to adjusts the headphone volume output level.
Turn the knob in a clockwise direction to increase the headphone volume.
12. FADER CURVE - This knob is used to change the way the crossfader will operate.
13. SCRATCH EFFECT - This will activate and deactivate the scratch effect function.
14. TIME ARRAY KNOB (PARAMETER X) - This knob is used to adjust the parameter time value.
15. EFFECT INDICATION LED - These LEDs will indicate which effect is applied.
16. DEPTH FEEDBACK KNOB (PARAMETER Y) - This knob is used to adjust the parameter ratio
value.
17. EFFECT SELECT KNOB - This knob is used to select your desired effect. Pushing this know will
open the effect parameter adjustment window.
18. EFFECT ON/OFF BUTTON - This button is used to turn your selected effect on and off.
19. (-) PITCH BEND BUTTON - The (-) pitch bend function creates a momentary “Slow Down” in
the BPM’s (Beats per minute) while it is playing. This will allow you to match the beats between two
playing audio sources. Remember, this is a momentary function. When you remove your finger from
the pitch button, the BPM’s will automatically return to pitch Slider'S (21) pitch value Holding
down this button will give a maximum of -100% pitch. Use this function to slow to another playing
music source. Be sure to notice that this function is a momentary pitch adjustment, for a more precise
adjustment use the pitch Slider (7) to match the BPM’s with another playing music source.
(+) PITCH BEND BUTTON - The (+) pitch bend function creates a momentary “BUMP” in the
BPM’s (Beats per minute) while it is playing. This will allow you to match the beats between two
playing audio sources. Remember, this is a momentary function. When you remove your finger from
this button, the BPM’s will automatically return to the pitch Slider'S (21) selected pitch. Holding
down this button will give a maximum of +100% pitch.
20. JOG SEEK - This button will activate and deactivate jog wheel search.
21. CUE SELECTOR BUTTON - This button will send the pre fader audio level to headphones for
monitoring.
22. PITCH SLIDER - This slider is used to adjust the playback pitch percentage. The slider is a set
adjustment and will remain set until the pitch slider is moved or the pitch function has been turned
off.
23. JOG WHEEL - This wheel has two functions;
A. The wheel works as a pitch bend during Playback. Turning the wheel clockwise can increase the
pitch percentage up to 100%, and turning the wheel in the counter-clockwise direction can de-
crease the pitch percentage down to -100%. The pitch bend will be determined on how long
you turn the jog wheel continuously.
B. The jog wheel also controls the scratch effect, when the scratch effect is active.
C. The jog wheel can also serve as frame search, when the search button is activated.
24. SHIFT BUTTON - This button is used for Sampler and Hot Cue storage.
GENERAL FUNCTIONS AND CONTROLS (Cont.)