Filter
Top Products
the other in this way, the beats can be matched.
4. LOOP IN BUTTON - “CUE ON THE FLY” - This function allows you to set a CUE POINT (see CUE
POINT page 17) without music interruption (“on the fly”). This button also sets the starting point of a
loop (see LOOP).
5. REPEAT BUTTON - When the player is in SINGLE mode and this button is pushed the song will
repeat until the button is pressed again. The Red LED above the button will glow when this function
is active.
6. +10 TRACK SKIP - This button allows you to skip ahead by 10 tracks. Example: if you are at Track
#1, pressing this button will skip you to Track #11, press the button again, it will skip to Track #21. If
there are not that many tracks, it will go back to Track #1.
7. SGL/CTN - This button allows the unit's play mode to change between Single and Continuous.
In single mode the unit will play a single track and return to cue mode. In continuous mode the unit
continues to play track by track and returns to cue mode after all tracks have played.
8. PITCH PERCENTAGE SELECTOR - Choose from pitch percentages of 4%, 8%, and 16%. See
page 15 for more details.
9. TIME - The TIME button is used to changed the displayed time values. Time can be displayed
as elapsed track time, remaining track time, and total disc remaining time.
10. TRACK BUTTONS -
TRACK BUTTON - This button is used to select your desired track. Tapping this but-
ton will forward skip to the next track, holding down this button will rapidly forward skip through the
tracks on your CD.
TRACK BUTTON - This button is used to select your desired track. Tapping this button
will skip backward to the previous track, holding down this button will rapidly skip backward through
the tracks on your CD.
11. LOOP OUT BUTTON - This button is used to set the ending point of a loop. A loop is started
by pressing the IN BUTTON (4), pressing the OUT BUTTON set the loop ending point. The loop will
continue to play until the OUT BUTTON is pressed once again.
12. RELAY BUTTON - This button is acitvates Flip-Flop™ mode. See page 18 for more informa-
tion.
13. PITCH BUTTON - This button is used to turn the pitch function on and off. The pitch functions
of the PITCH SLIDER (3), PITCH BEND BUTTONS (14) and JOG WHEEL (1) will not function without
this function being activated. The pitch slider and pitch bend buttons have a maximum range of
+/-16%. The "+" and "-" pitch bend buttons have a maximum range of 16%.
14. PITCH BEND BUTTONS -
(-) PITCH BEND - The (-) pitch bend function creates a momentary “Slow Down” in the CD’s pitch
speed (Beats per minute - BPM) when the PITCH (13) function is activated. This functions allows the
beats between two CD’s or any other music source to match. This is a momentary function. When the
button is depressed the pitch speed will automatically return to PITCH SLIDER'S (3) selected pitch.
Holding down this button will give a maximum of -16% pitch. Be sure to remember that this func-
tion is a momentary pitch adjustment, for a more precise adjustment use the PITCH SLIDER'S (3) to
match the BPM’s with another playing music source.
(+) PITCH BEND - The (+) pitch bend function creates a momentary “BUMP” in the CD’s pitch
©American Audio® - www.americanaudio.us - DCD-PRO310 MKII™ Instruction Manual Page 9
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT (CONT)