Filter
Top Products
BASIC OPERATIONS
1. OPENING AND CLOSING THE DISC TRAY AND LOADING DISCS
a) Opening and closing the disc tray
• This operation only works when the power is on.
• Press the OPEN/CLOSE button to open or close the disc tray. OPEN/CLOSE buttons are provided on
both the main unit and control unit or
• Press PLAY button, tray automatically closes.
• If tray is not closed after 60 seconds it will close automatically and pause.
• The disc trays cannot be opened during playback to prevent playback from being interrupted if the
OPEN/CLOSE button is pressed accidentally. Stop playback, then press the OPEN/CLOSE button.
2. LOADING DISCS
• Hold the disc by the edges and place it in the disc tray. Do not touch the signal surface (the glossy side).
• When using 5 inch/12 cm discs, place the disc in the outer tray guides (Figure 8), and when using 3 inch
/8 cm discs, place them securely in the inner guides (Figure 9).
Fig.8 Fig.9
CAUTION:
•
DO NOT
place any foreign objects in the disc tray, and do not place more than one disc in the disc tray at a
time. Doing so may result in malfunction.
•
DO NOT
push the disc tray in manually when the power is off, as this may result in malfunction and
damage the player.
3. SELECTING TRACKS
• Select desired track using NUMBER Button or
• Press the TRACK Buttons once to move to one higher or lower track or
• Hold the TRACK buttons in to change tracks continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the search operation is
completed.
4
.
STARTING PLAYBACK
• Press the PLAY/PAUSE button during the pause or cue to start playback.
• The PLAY indicator lights when playback starts.
• The point at which playback starts is automatically stored in the memory as the cue point. The pickup then
returns to the cue point (the point at which playback started) when the CUE button is pressed. (Back Cue)
American audio • DCD-PRO300™ INSTRUCTIONS MANUAL • PAGE 8
5 in. / 12cm disk
3 in. / 8cm disk