Filter
Top Products
than return to cue mode on the first track in the program.
5. PRG - (PROGRAM BUTTON) The PROGRAM button will activate program mode. When pro-
gram mode is activated the LED above the button will glow. For programming information see
“Programming” on page 17.
6. PITCH BUTTON - This button is used to turn the pitch function on and off. The pitch functions
of the PITCH SLIDER (11), PITCH BEND BUTTONS (12 & 13) and JOG WHEEL (16) will not function
without this function being activated. By holding down this button and pressing (+) or (-) buttons, the
pitch percentage value can be changed from (+/- 8%), (+/-12%), or (+/- 16%).
7. LCD COLOR - This button is used to change the illumination color of the LCD.
8. TRACK BUTTON - This button is used to select your desired track. Tapping this button will
forward skip to the next track, holding down this button will rapidly forward skip through the tracks
on your CD.
9. +10 TRACK SKIP - This button allows you to skip ahead by 10 tracks. Example: if you are at Track
#1, pressing this button will skip you to Track #11, press the button again, it will skip to Track #21. If
there are not that many tracks, it will go back to Track #1.
10. TRACK BUTTON - This button is used to select your desired track. Tapping this button
will skip backward to the previous track, holding down this button will rapidly skip backward through
the tracks on your CD.
11. PITCH SLIDER - This slider is used to adjust the playback pitch percentage when the PITCH (6)
function is activated. The slider is a set adjustment and will remain set until the pitch slider is moved
or the PITCH (6) function has been turned off. This adjustment can be made with or without a CD in
the drive. The pitch adjustment will remain even if a disc has been removed, and will reflect on any
other disc loaded into the unit. That is to say, if you set a +2% pitch on one disc, remove that disc
and insert another, that disc will also have a +2% pitch. The amount of pitch being applied will be dis-
played in the LCD (2). Use this slider to match the BPM’s of this unit to that of another music source.
By changing the pitch of one disc with respect to the other in this way, the beats can be matched.
12. (+) PITCH BEND - The (+) pitch bend function creates a momentary “BUMP” in the CD’s pitch
speed (Beats per minute - BPM) when the PITCH (6) function is activated. This functions allows the
beats between two CD’s or any other music source to match. This is a momentary function. When
the button is depressed the pitch speed will automatically return to PITCH SLIDER'S (11) selected
pitch. Holding down this button will give a maximum of +16% pitch. Be sure to remember that this
function is a momentary pitch adjustment, for a more precise adjustment use the PITCH SLIDER'S
(11) to match the BPM’s with another playing music source.
13. (-) PITCH BEND - The (-) pitch bend function creates a momentary “Slow Down” in the CD’s pitch
speed (Beats per minute - BPM) when the PITCH (6) function is activated. This functions allows the
beats between two CD’s or any other music source to match. This is a momentary function. When
the button is depressed the pitch speed will automatically return to PITCH SLIDER'S (11) selected
pitch. Holding down this button will give a maximum of -16% pitch. Be sure to remember that this
function is a momentary pitch adjustment, for a more precise adjustment use the PITCH SLIDER'S
(11) to match the BPM’s with another playing music source.
14. PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to
change from play to pause or from pause to play. While in play mode the green play LED will glow,
and while in pause mode the green play LED will flash.
©American Audio® - www.AmericanAudio.us - DCD-PRO240™ Instruction Manual Page 9
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT (CONT)