Filter
Top Products
LIQUID CRYSTAL DISPLAY (LCD)
B. LCD DISPLAY (FIGURE 6)
30. TIME BAR INDICATOR - This bar visually
details the time defined in the TIME METER (36
,
37, & 38
). As with the TIME METER (36, 37, & 38),
this bar is also dependent on the selected time
function (TOTAL REMAIN (32), REMAIN (33) OR
ELAPSE (31
). This bar will begin to flash when 15
seconds of a track remain and will begin to rap
-
idly flash when three seconds of a track remain.
The flashing bar is a great visual reminder a track
is about to end. The flashing bar will function
regardless of which time mode the unit is in.
31. ELAPSE INDICATOR - This indicator is in
direct reference to the TIME METER (36, 37, &
38
). When the ELAPSE indicator is displayed in
the LCD, the time defined will refer to a single
track's elapsed time. The time mode is changed
by the tapping on the TIME button (17)
.
32. TOTAL REMAIN INDICATOR - This indica
-
tor is in direct reference
to the TIME METER (36,
37, & 38
). When the TOTAL REMAIN indicator is
displayed in the LCD, the time defined will refer
to a disc's total remaining time. The time mode is
changed by tapping on TIME button (17)
.
33. REMAIN INDICATOR - This indicator is in
direct reference
to the TIME METER (36, 37, &
38
). When the REMAIN indicator is displayed in
the LCD, the time defined will refer to a single
track's remaining time. The time mode is changed
by tapping on TIME button (17)
.
34. PLAY INDICATOR - This indicator will glow
when the unit is in play mode.
35. TRACK INDICATOR - This double digit indi
-
cator details a current track.
The number dis-
played in the track indicator is a direct reference
to a track being selected for programming or a
track in play, pause, or cue mode.
36. MINUTES METER - This meter will display
the elapse, total, or remaining time in minutes.
The display time will be indirect referenc
e to the
current time mode.
37. SECONDS METER - This meter will display
the elapse, total, or remaining time in seconds.
The display time will be indirect reference to the
current time mode.
38. FRAME METER - This meter will display the
elapse, total, or frames. The displayed frames will
be indirect reference
to the current time mode.
39. SINGLE INDICATOR - This indicates the unit
is in single play mode, the unit will play a single
and return to CUE mode. If the single indicator is
not displayed the unit is in continuous mode. In
continuous mode the drive will play through all
the tracks on the disc. Once all the tracks have
ended the unit will return to cue mode.
40. PITCH METER - This meter displays the
pitch percentage being applied to playback by
the PITCH SLIDER (21). If the meter read zero
regardless of the PITCH SLIDER'S (21) position,
the PITCH (27) function is not activated.
©American Audio® - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 11
LCD DISPLAY
30
34 35 36 37 38 39 40
333231
Figure 4