Filter
Top Products
7
- XLR Connector Wiring For Phantom Power
PIN1 GND
PIN 2 +48v
PIN 3 +48v
4. INSTALLATION AND CONNECTION
4.1 Mains Connection
4.2 Audio Connection
The MP2D presents with balanced XLR & 1/4" TRS and combo connectors, and it can be interfaced by
several ways to support a variety of applications without any signal loss. The MP2D can be used on a single
instrument by connecting to a mixing console's main inserts, or on an entire mix "in-line" between a mixing
console's outputs and a power amplifier.
- Wiring Configuration
Either the 1/4" TRS phone jack or the XLR connector can be wired in balanced and unbalanced modes, which
will be determined by the actual application status, please wire your system as the following wiring examples: