LTO
LTO
TM
Care & Safety Instructions
1
All the safety and operating instructions should be read before this product is installed and operated. We recommend
that installation be carried out by an authorized mobile electronics installation company. Please contact your local ALTO
Mobile distributor for a list of authorized installers in your area.
DO NOT DISASSEMBLE:
No user serviceable parts inside; refer servicing to qualified personnel only.
WATER & MOISTURE:
The equipment should be protected from moisture and rain, especially if mounted in the vehicle's trunk area or any loca-
tion that may be susceptible to water ingress.
PRODUCT LOCATION:
The equipment should be situated so that its location does not interfere with safe driving of the vehicle. Avoid locations
close to safety air bags. Ensure proper ventilation. The product should not be situated under carpeting or in a totally
sealed enclosure. Partly enclosed equipment racks should be well ventilated, using forced air cooling fans if necessary.
Locate away from heat sources such as engine exhaust systems and coolant radiators.
POWER SOURCE & GROUNDING:
This product is designed only for vehicles with a 12 VOLT NEGATIVE GROUND electrical circuit. This product may be
damaged if used in vehicles with a 24 Volt supply or a positive ground electrical circuit.
ELECTRICAL CONNECTION:
Improper electrical wiring may invalidate the product warranty and/or the vehicle warranty. Installation should only be
undertaken by a qualified automotive electrician, preferably MECP qualified or local equivalent.
CARE & CLEANING:
Clean only with a dry cloth. Avoid sharp objects from making contact with the case.
SERVICING:
If a malfunction occurs, the equipment should be serviced only by qualified personnel. Return to the dealer who supplied
you with the unit.
Critical components should only be replaced with factory parts or recommended equivalents.