Filter
Top Products
TRANSCODERS
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
TR6102HD Transcoder. Keep this manual handy
for future reference. These safety instructions are
to ensure the long life of your TR6102HD and to
prevent fire and shock hazard. Please read them
carefully and heed all warnings.
1.1 GENERAL
• Unauthorized personnel shall not open the unit
since there are high-voltage components inside.
• Qualified Altinex service personnel, or their
authorized representatives must perform all
service.
1.2 SAFETY GUIDELINES FOR THE RACK-
MOUNTING OF THE TR6102HD
• Maximum operating ambient temperature is 35
(degrees C).
• Never restrict the airflow through the devices’
fan or vents.
• When installing equipment into a rack,
distribute the units evenly. Otherwise,
hazardous conditions may be created by an
uneven weight distribution.
• Connect the unit to a properly rated supply
circuit.
• Reliable Earthing (Grounding) of Rack-
Mounted Equipment should be maintained.
1.3 INSTALLATION
• For best results, place the TR6102HD
Transcoder on a flat, level surface in a dry area
away from dust and moisture.
• To prevent fire or shock, do not expose this unit
to rain or moisture. Do not place the TR6102HD
Transcoder in direct sunlight, near heaters or
heat radiating appliances, or near any liquid.
Exposure to direct sunlight, smoke, or steam
can harm internal components.
• Handle the TR6102HD Transcoder carefully.
Dropping or jarring can damage internal
components.
• Do not place heavy objects on top of the
TR6102HD. If the TR6102HD is to be mounted
to a table or wall, use only Altinex made
mounting accessories, such as the mount mini-
brackets DA1295SX and cables for optimum
setup.
• To turn off the main power, be sure to remove
the cord from the power outlet. The power outlet
socket should be installed as close to the
equipment as possible, and should be easily
accessible.
• Do not pull the power cord or any cable that is
attached to the TR6102HD Transcoder.
• If the TR6102HD Transcoder is not used for an
extended period, disconnect the power cord
from the power outlet.
1.4 CLEANING
• Unplug the TR6102HD power cord before
cleaning. Clean surfaces with a dry cloth. Never
use strong detergents or solvents, such as
alcohol or thinner. Do not use a wet cloth or
water to clean the unit.
1.5 FCC / CE NOTICE
• This device complies with part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
• This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communication. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.