Filter
Top Products
DISTRIBUTION AMPLIFIERS
3
cause harmful interference to radio
communications. Operation of this equipment
in a residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.
• Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.
ABOUT YOUR DISTRIBUTION AMPLIFIER 2
The DAA0106-V0A2 is a product of exceptional
quality and design, which includes stereo audio
amplifiers.
The audio amplifier is designed to provide six
buffered and amplified outputs for both left and
right channels. The input signals are isolated to
prevent ground loops. The input termination is
switch selectable to either be 600 Ohms or high
impedance.
The DAA0106-V0A2 Distribution Amplifier is a
state-of-the-art product with a bandwidth of 10Hz to
20kHz for audio signals.
TECHNICAL SPECIFICATIONS 3
FEATURES/DESCRIPTION Audio
GENERAL
No. of Inputs
1
Input Connector One 3.5 mm 5-pin
Terminal Block
No. of Outputs
6
Output Connector Six 3.5mm Terminal
Blocks
Compatibility
Stereo or Mono Audio
Table 1. DAA0106-V0A2 General
MECHANICAL Audio
Material 0.1” Al
Finish Gray
Top Panel Lexan
Height (inches) 1.75in (44mm)
Width (inches) 8.50in (216mm)
Depth (inches) 4.93in (125mm)
Weight (pounds) 2.0lbs. (0.91kg)
Ship Weight (pounds) 4.0lbs. (1.81kg)
T° Operating 10°C-35°C
T° Maximum 50°C
Humidity
50% non-condensing
MTBF (calculations) 40,000 hrs
Table 2. DAA0106-V0A2 Mechanical
ELECTRICAL Audio
Input Signals
Level 10 V p-p max
Impedance 600 Ohms or high
impedance
Type Differential input
isolated from GND
Output Signals
Level 10V p-p
Impedance Low – drives 600 Ohms
Type Differential input
isolated from GND
Gain 0 dB unbalanced, +6dB
balanced
Frequency Compatibility
Typical Bandwidth 10Hz – 20kHz
Power
Internal Power Supply 90-140V/
200-240V
Power Consumption
10 watts max
Table 3. DAA0106-V0A2 Electrical