Alpine KTX-100EQ Speaker System User Manual


 
1-EN
ALPINE KTX-100EQ 68-08564Z99-A (EN)
Accessories
Installation
The Program is available only on the Microsoft
®
Windows
®
XP Service Pack-2 system. Make sure that this
program is available by referring to “System Properties” on your PC.
To use this program, Microsoft.NET Framework 1.1 (or later) is required. If this application is not installed on your
PC, the application is automatically installed with the program.
1
Insert the supplied CD-ROM into the CD-ROM drive, and activate the setup.exe in the
IMPRINT folder. Follow the installation instructions on the screen.
Before installing, close all activated programs.
2
Activate the USB_setup.exe in the DRIVER folder, and then install according to the
instructions on the screen.
3
After completing the installation, restart your PC.
Caution before Installing
Install the IMPRINT SOUND MANAGER program before connecting the KTX-100EQ to your personal
computer. If the program is installed when the KTX-100EQ connected to the PC, the program may
malfunction.
Operating System
Installing
CD-ROM Interface Box USB Cable (5m)
Sound Characteristics
Measurement Microphone (3m)
Connection Cable for
Head Unit (2m)
KTX-100EQ.book Page 1 Friday, April 13, 2007 4:31 PM