Alpine iDA-305 Stereo System User Manual


 
28-EN
Changing the Display
Text information, such as the channel name, artist name/feature, and
song/program title, is available with each XM or Sirius channel. The
unit can display this text information as explained below.
In XM or SIRIUS mode, press VIEW.
Each time you press this button, the display changes as shown below.
XM mode:
SIRIUS mode:
*
1
When ADF is turned OFF, this information is not displayed (see
“Setting the Auxiliary Data Field Display” on page 28).
*
2
If a channel is stored in the preset No., the channel No. and preset
No. will be alternately displayed.
When the “Scroll Setting (Text Scroll)” (page 22) is set to “Auto,” the
channel name and song title scrolls continuously. When the Scroll
Setting is set to “Manual,” the channel name and song title scrolls
only once.
Depending on the model, the display may differ from the one shown
above.
Setting the Auxiliary Data Field Display
The XM Auxiliary Data Field (ADF) display can be switched on or off.
There is no ADF function for the SIRIUS receiver.
1
Press and hold (FUNCTION/SETUP) for at least
2 seconds to enter the Setup mode.
2
Rotate the Double Action encoder to select the
XM mode, and then press
/ENTER.
3
Press /ENTER to select “XM ADF”.
4
Rotate the Double Action encoder to select On/
Off, and then press
/ENTER.
When setting to On, Auxiliary Data Field is displayed by
pressing
VIEW (Refer to the “Changing the Display”
section on page 28.)
5
Press and hold for 2 seconds to return to
normal mode.
Pressing during the procedure will return to the previous mode.
*
1
Calendar/
Clock
Auxiliary
Data Field
Channel No./Channel Name
Song title
Artist title
Category
Channel No./Channel Name
Song title
Artist title
Category
Calendar/
Clock
Channel No.*
2
/Channel Name
Song title
Artist title
Composer
Channel No.*
2
/Channel Name
Song title
Artist title
Category
Channel No.*
2
/Channel Name
Song title
Artist title
Category