Alpine CDM-9823, CDM-9821 CD Player User Manual


 
8-EN
Radio Operation
Changing the Radio Frequencies
for each Country
For customers not living in North America, change the
radio frequencies as follows.
1 Press and hold the F/SETUP button for at least 3
seconds.
2 Choose the area mode by pressing the g or
f button.
3 Choose either A-1 or A-2 by pressing the BAND
button.
A-1: Radio frequencies for North America
A-2: Other Radio frequencies
NOTE
The stored radio stations will be cleared every time you
change the setting.
Manual Tuning
1 Press the SOURCE/POWER button until a radio
frequency appears in the display.
2 Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
F1(FM1) F2(FM2) AM
3 Press the TUNE/A.ME button repeatedly until
"DX SEEK" and "SEEK" disappear from the
display.
NOTE
The initial mode is DX SEEK.
4 Press the g or f button to move downward
or upward one step respectively until the desired
station frequency is displayed.
NOTE
The ST indicator or STEREO indicator appears on the
display when a Stereo FM station is tuned in.
Automatic Seek Tuning
1 Press the SOURCE/POWER button until a radio
frequency appears in the display.
2 Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the band:
F1(FM1) F2(FM2) AM
3 Press the TUNE/A.ME button to illuminate the
DX and SEEK indicators in the display.
With the DX (Distance) mode activated, both
strong and weak stations will be tuned in the
Auto-Seek operation.
Press again to return to the local mode. The DX
indicator will turn off and the SEEK indicator will
remain illuminated. Now, only strong stations will
be tuned.
4 Press the g or f button to automatically
seek for a station downward or upward
respectively.
The unit will stop at the next station it finds.
Press the same button again to seek the next
station.
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Press and hold the Preset buttons (1 through
6) that you want to store the station on for at
least 2 seconds.
The selected station is stored. The display shows
the band, preset No. and station frequency
memorized.
3 Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 18 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2
and AM ).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Preset buttons (1 through 6)F/SETUP
g f
SOURCE/
POWER TUNE/A.ME BAND
3/08-09_CDM-9821(EN) 03.7.31, 11:27 AM8