Filter
Top Products
13-EN
Displaying and Scrolling CD Text
While playing the audio CD with CD Text, the disc
and track names can be displayed and scrolled.
1 In CD mode, press the TITLE button repeatedly
to display Disc Text or Track Text.
NOTE
If your CD has no Text Information, NO TEXT appears.
2 Press and hold the TITLE button for at least 3
seconds to scroll the information stored on the
disc.
After scrolling, the display returns to normal
mode.
NOTE
SCROLL: the display is scrolled only when a disc is
loaded or when a track is changed and when the power
turn on during CD mode on this unit.
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer is
connected to the 8-pin DIN connector (M-Bus) of
the CDM-7871, you can control the CD changer
using the CDM-7871.
NOTE
The CD controls on the CDM-7871 for the CD changer
operation are functional only when the CD Changer is
interconnected with the CDM-7871.
1 Press the SOURCE button to activate the
CHANGER mode.
The display shows the "Changer", disc number
and track number.
2 Press the Disc Select buttons (1 through 6)
corresponding to one of the discs loaded in the
CD Changer. The selected disc number appears
in the display and CD playback starts.
NOTES
• After selecting the desired disc, you can operate in the
same way as for the CD player.
For details, please see the CD Player Operation
section.
• If the "F" indicator is illuminated the Disc Select
buttons become nonfunctional.
Repeat Play
1 Press the REPEAT button to play back
repeatedly the track being played.
The RPT indicator appears and the track will be
played repeatedly.
Press the REPEAT button again and select OFF
to deactivate the repeat play.
NOTE
If a CD Changer is connected and the RPT ALL mode is
selected, the unit repeatedly plays back all tracks on the
disc selected.
NOTE
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the "F" indicator and go to step 1.
M.I.X. (Random Play)
1 Press the M.I.X. button in the play or pause
mode.
The M.I.X. indicator will illuminate and the tracks
on the disc will be played back in a random
sequence. After all the tracks on the disc have
been played back once, the player will begin a
new random sequence play until the M.I.X. mode
is cancelled.
To cancel M.I.X. play, press the M.I.X. button
again to turn off the M.I.X.
NOTE
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the "F" indicator and go to step 1.
Scanning Programs
1 Press the SCAN button to activate the Scan
mode.
The first 10 seconds of each track will be played
back in succession.
To stop scanning, press the SCAN button and
deactivate the Scan mode.
NOTE
In case a 6-disc CD changer is connected:
In CD changer mode, press the "F" button to illuminate
the "F" indicator and go to step 1.
→
→
RPT RPT ALL OFF
→
Fast Forward and Backward
1 Press and hold the g DN or f UP button to
quickly move backward or forward until you
reach the desired section of the track.