Alpine CDM-7871 CD Player User Manual


 
12-EN
Opening and Closing the Movable
display
1 Press the c button.
The movable display will open.
To close the movable display, press the c button
again.
The movable display will close.
NOTES
Do not apply shock to the movable display when it is
open as it may result in malfunction of the unit.
The display may be dim during low temperatures and
immediately after turning on the power. The brightness
will return to normal as time elapses.
The display will stop at the set angle when closing.
CAUTION
Keep hands (or any other object) away from the display
while it is opening or closing to avoid damage or injury.
The back of the movable display will get very warm
under normal operating conditions. This is not a
malfunction. Do not touch.
Playback
1 Press the c button.
The movable display will open.
CD Player Operation
(Movable display fully opened)
Insert a disc with the label side facing up.
g DN
f UP
-/J
M.I.X.
Disc Select buttons (1 through 6)
c
SCANREPEAT
SOURCE
TITLE
2 Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will
begin.
When a disc is already inserted, press the
SOURCE button to switch to the CD mode.
The mode will change every time the button is
pressed.
3 To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
4 To eject the disc, press the c button.
NOTES
Three-inch (8cm) CD's can be used.
If the CD does not eject, press c button again for
more than 3 seconds.
Only compact discs containing the mark shown can be
used.
We cannot fully guarantee the playback of CD-R (CD-
Recordable). You cannot playback CD-RW (CD-
ReWritable) on this unit.
Music Sensor (Skip)
1 Momentarily press the g DN button once
during CD play to return to the beginning of the
current track. If you wish to access the beginning
of a track further back, repeatedly press until you
reach the desired track.
Press the f UP button once to advance to the
beginning of the next track. If you wish to access
the beginning of a track further ahead, press
repeatedly until the desired track is reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
(* Only when the CD changer is connected)
TUNER CD CD CHANGER*