Filter
Top Products
23-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. Choose the SETUP menu from Sound Customizing, Visual
Customizing, etc., to select your desired setting.
The common operation for SETUP is step 1 to 4 as
follows. See down below for further information
about each SETUP menu.
1
Press and hold F/SETUP for at least 3 seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
(e.g. Select BEEP)
Here is the explanation for CDA-9815 display example.
NORMAL/HI-FI/STABLE → DIMMER*
2
→ SUB-W →
SUB-W STEREO/SUB-W MONO*
2
→ CD-DA / CD-DA/MP3 →
BEEP → SCROLL → SCROLL TYPE*
1
→ MUTE → INTERRUPT
→ AUX → (AUX name)*
3
→ PWR-IC → CONTRAST*
1
→
FONT*
1
→ AREA *
4
→ DEMO → NORMAL/HI-FI/STABLE
*
1
CDA-9815 only.
*
2
CDA-9815/CDA-9813 only.
*
3
Displayed only when AUX is ON.
*
4
“Radio” (page 8)
3
Press BAND/TEL. to change the setting.
(e.g. Select BEEP ON or BEEP OFF.)
• The Display Contrast described in the section “Adjusting Display
Contrast (CDA-9815 only)” can also be changed by turning the
Rotary encoder.
4
Press F/SETUP again.
The display returns to normal mode.
Sound Customizing
Switching the Tuner Mode
NORMAL (Initial setting) / HI-FI / STABLE
This unit incorporates the MAX TUNE SQ for the highest quality
tuner audio. Moreover, you can choose between three settings to suit
your own personal sound preferences and usage.
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
• If you find the sound is very noisy while listening to the tuner in Hi-
Fi mode, we recommend you change to Normal mode.
Subwoofer On and Off
SUB-W ON (Initial setting) / SUB-W OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output phase and level.
1 Press the Rotary encoder repeatedly to select the
SUB-W mode.
SUB-W → BALANCE → FADER → DEFEAT → VOLUME →
SUB-W
2 Press g or f.
The subwoofer output phase is toggled SUB-W
NORMAL (0°) or SUB-W REVERS (180°).
To adjust the level, turn the Rotary encoder.
Setting the Subwoofer Output (CDA-9815/CDA-9813 only)
STEREO (Initial setting) / MONO
You can set the subwoofer output to stereo or monoaural. Make sure
to set the correct output for your subwoofer type.
STEREO: Subwoofer stereo (L/R) output
MONO: Subwoofer monaural output
Sound (Beep) Guide Function
BEEP ON (Initial setting) / BEEP OFF
This function will give audible feedback with varying tones
depending upon the button pressed.
Visual Customizing
Dimmer Control (CDA-9815/CDA-9813 only)
DIMMER AUTO (Initial setting) / DIMMER MANUAL
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON.This
mode is useful if you feel the unit's backlighting is too bright at night.
Scroll Setting
SCROLL AUTO / SCROLL MANUAL (Initial setting)
This CD player can scroll the disc and track names recorded on CD-
TEXT discs, as well as the text information of MP3/WMA files,
folder names, and tags.
SCROLL AUTO : The CD text information, the text information
of folder and file names, and the tags are scrolled
automatically.
SCROLL MANUAL : The display is scrolled only when a disc
is loaded or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display. The disc titles input manually (page 21) cannot be
scrolled.
f g
BAND/TEL.
F/SETUP
Rotary encoder
SOURCE/
POWER