Alpine CDA-9813 CD Player User Manual


 
9-EN
CD / MP3 / WMA
Playback
1
Press c.
The movable display will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
The movable display will close and playback will begin.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER CD CD CHANGER* TUNER
* Only when the CD changer is connected
3
Press g or f to select the desired track (file).
Returning to the begining of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
4
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold c for at least 3 seconds
with the movable display open.
The CD-player can play discs containing audio data, MP3 data
and WMA data.
The MP3 indicator is lit during MP3 playback.
The WMA indicator is lit during WMA playback.
The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
While playing back MP3/WMA, press 8 or 9 to move the folder
up or down.
c
-/J
g f
Rotary
encoder
SEARCH
6( )
8
9
4(
)
5(
)
Station Title Search Function
If titles for radio stations are entered, you can search for a radio
station from its title.
.
1
Press SEARCH in Radio mode to switch to Title
Search mode.
The first title input blinks in the display.
2
Select the desired title by turning the Rotary
encoder within 10 seconds.
3
Press the Rotary encoder to receive the
frequency of the selected title.
Search mode in Title Search mode is canceled by pressing and
holding SEARCH for at least 2 seconds.
If a station has no title, "NO TITLE" is displayed for 2 seconds.
Quick Search Function
You can search for a radio station by its frequency.
1
Press and hold SEARCH for at least 2 seconds
in Radio mode to activate Quick Search mode.
2
Turn the Rotary encoder within 10 seconds to
select the desired frequency.
3
Press the Rotary encoder to receive the selected
frequency.
Search mode in Quick Search mode is canceled by pressing and
holding SEARCH for at least 2 seconds.
SOURCE/
POWER