Filter
Top Products
7-EN
Detaching and Attaching the Front Panel
Detaching
1
Turn off the unit power.
2
Press (Release) at the lower left side until the
front panel pops out.
3
Grasp the left side of the front panel and pull it out.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel.) This is not a
malfunction.
•To protect the front panel, place it in the supplied carrying case.
Attaching
1
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
2
Push the left side of the front panel until it locks
firmly into the main unit.
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
•Attach the front panel carefully. Hold the panel by its sides to avoid
pushing any buttons by mistake.
2
1
1
Radio
Changing the Radio Frequencies for each
Country
For customers not living in North America, change the radio
frequencies as follows.
1
Press and hold F/SETUP for at least 2 seconds to
select the SETUP mode.
2
Select the "AREA" mode by pressing g or f.
3
Choose either AREA 1 or AREA 2 by pressing the
BAND.
AREA 1: Radio frequencies for North America
AREA 2: Other Radio frequencies
4
Pressing F/SETUP will return to normal mode.
• The stored radio stations will be cleared every time you change the
setting.
Preset buttons
(1 through 6)
g f Rotary
encoder
SEARCH/
Q.S.
F/SETUP
SOURCE/
POWER
TUNE/
A.ME
BAND