Filter
Top Products
9-EN
CD/MP3/WMA
Playback
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
When a disc is already inserted, press SOURCE/POWER
to switch to the CD mode.
The mode will change every time the button is pressed.
TUNER → CD → CD CHANGER* → TUNER
* Only when the CD changer is connected
2
While playing back MP3/WMA, press 8 or 9 to
select the desired folder.
Pressing and holding 8 or 9 will change folders
continuously.
3
Press g or f to select the desired track (file).
Returning to the beginning of the current track (file):
Press g.
Fast backward :
Press and hold g.
Advancing to the beginning of the next track (file) :
Press f.
Fast forward :
Press and hold f.
4
To pause playback, press -/J.
Pressing -/J again will resume playback.
5
To eject the disc, press c.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold c for at least 2 seconds
with the movable display open.
File number
display
Folder number
display
Elapsed time
• The CD-player can play discs containing audio data, MP3 data
and WMA data.
•A WMA format file that is protected by DRM (Digital Rights
Management) cannot be played back on this unit.
• The track display for MP3/WMA data playback is the file numbers
recorded on the disc.
• If the HDA-5460 model is connected to the unit, some operations
(for example changing the source, selecting the file by holding
buttons up or down, etc.), can be carried out on this unit.
MP3/WMA Play Display
The folder number and file number will be displayed as
described below.
•Press TITLE to switch the display. Please see “Displaying the
Title/Text” (page 14) for information about display switching.
Repeat Play
Press 4 ( ) to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 ( ) again and select OFF to deactivate repeat play.
CD mode :
RPT : Only a track is repeatedly played back
↓
RPT
*1
: A disc is repeatedly played back
↓
(off)
*1 When a CD changer is connected
• If REPEAT is set to ON during M.I.X. play in CD changer mode,
M.I.X. will apply to the current disc only.
MP3/WMA mode :
RPT : Only a file is repeatedly played back
↓
RPT :
Only files in a folder are repeatedly played back
↓
RPT
*2
:A disc is repeatedly played back
↓
(off)
*2 When an MP3 compatible CD changer is connected
• If a 6-disc CD changer or an MP3 compatible CD changer is
connected:
In the CD changer mode, press F/SETUP to illuminate the
“ ” indicator, and go to the step above within 10 seconds.
• If a 12-disc CD changer is connected:
In the CD changer mode, press F/SETUP twice to illuminate the
“ ” indicator, and go to the step above within 10 seconds.
-/J8
9
SEARCH/
Q.S. c
g f
Rotary
encoder
6(
)
4(
)
5(
)
TITLE
F/SETUP
F01 T03 10'15