Filter
Top Products
8-EN
Basic Operation
Demonstration
This unit has a Demonstration feature which
simulates the display functions.
1 Press and hold the INTLZ button for at least 2
seconds.
2 Press the f UP button to select the DEMO
mode. Each press changes the modes as shown:
∗ CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3 Press the TUNE button to turn on or off the
DEMO mode.
Each press toggles between DEMO ON and
DEMO OFF.
If no button is pressed 30 seconds after the
DEMO mode is turned ON, "DEMO" blinks 3
times in the display.
The DEMO mode then begins.
NOTE
The initial setting at the factory is "DEMO OFF."
4 Press and hold the INTLZ button for at least 2
seconds again to return to normal operation.
INTLZ/DISP A.PROCSOURCE
BLACK OUT DN gTUNE f UP
Setting the AUX Mode
You can input TV/video sound by connecting an
optional Ai-NET/RCA Interface cable (KCA-121B)
to this component.
1 Press and hold the INTLZ button for at least 2
seconds.
2 Press the f UP button repeatedly to select
"AUX" .
Each press of the f UP button changes the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
∗ CDA-7969 Only
∗∗ Displayed after AUX-IN ON is set.
3 Press the TUNE button to toggle the mode
between AUX-IN ON and AUX-IN OFF.
NOTES
• The initial setting at the factory is AUX-IN OFF.
• You can set the AUX mode display by pressing the
DN g or f UP button after AUX-IN ON is set,
select the AUX mode display setting, and then press
the TUNE button.
4 Press and hold the INTLZ button for at least 2
seconds to return to normal mode.
5 To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
→ TUNER → CD → AUX
NOTE
When AUX-IN ON is selected, a CD Changer cannot be
used.
Audio Control
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←
→ AMBER → DIM → SUB-W → BEEP → MUT
E → SCR
D-OUT∗ ← CLOSE ← DEMO ← AUX (
AUX Mode Display Setting∗∗)