Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming
27
9001889
Cycle Count
Reading Cycle Count
1. Enter Program Mode by turning key to
PROGRAM position (xx represents a cycle
number from 00 to 99).
2. Press “Auxiliary” key, then “3” key, then “1” key.
3. The total hours of cycle operation (actual run
time) will display. Press “Advance” key to
continue.
Example display shows 347 total hours (of all
cycles).
4. Display now shows total cycle count. Press
“Advance” key to continue into calibration
mode, or press “Clear/Stop” key to exit.
Example display shows 5 total cycles have been
run.
Program Cycle xx
RUN
PROGRAM
Program Cycle xx
Total Working
Hours 347
Total Cycle : 5
OR...