Filter
Top Products
2 Connections
20
AC Power Hookup
The DEQ230D has what’s known as a “switching power supply.”
This means it will detect any standard line voltage from 90 to 230
volts, 50-60 Hz, and adapt itself to that. All you need is the proper
A/C cable for the country in which you find yourself. Just plug the
"female" end of the power cable into the DEQ230D’s POWER
receptacle and the “male” end into a good quality, noise-free A/C
power source.
The DEQ230 will work with any standard line voltage from 100 to
240 volts as long as the appropriate detachable power supply
adapter is used. The DEQ230 has been shipped with the suitable
adapter for the line voltage in your area.
Plug the "barrel" end of an approved power supply adapter into
the DEQ230’s POWER 9V AC jack and the transformer end into
a good quality, noise-free AC power source of the proper rating.
To use the DEQ230 in another country:
Your DEQ230 was supplied with the correct power supply adapter
for your country or local area. If you plan to travel with it to
another country, obtain an Alesis AC power supply adapter
compatible with the outlets used in the other country and use it in
place of the supplied adapter. These can be obtained through your
Alesis dealer or through the Alesis Parts department.
The DEQ230 is specifically
designed to be powered by
the power supply adapter we
have included. Do not
substitute any other type of
p
ower supply adapter. If a
replacement is needed, one
may be purchased from your
A
lesis dealer or from the
A
lesis Parts departmen
t
.