Filter
Top Products
Tape – Recording
17
GB
You can record just the portions you like from a
CD on a tape. You can also record a radio
program.
Use buttons on the unit for the operation.
For model XR-EM550
1 Load a recordable tape.
2 Select the desired source to record.
• TUNER: To record from this system’s
tuner.
• CD: To record from this system’s CD
player.
• MD: To record from the optional
component connected to the MD jacks.
3 Press z REC PAUSE/START.
“REC” flashes and “N” appears and the
tape deck stands by for recording.
4 Press DIRECTION repeatedly to select
“g” to record on one side or “h” (or
“j”) to record on both sides.
5 Press TAPE/nN repeatedly to select
the recording side.
If you select both sides recording or front
side recording, press TAPE/nN until
“N” appears. If you record on the reverse
side, press TAPE/nN again until “n”
appears.
6 Press z REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
Note
When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
For other models
1 Load a recordable tape.
2 Select the desired source to record.
• TUNER: To record from this system’s
tuner.
• CD: To record from this system’s CD
player.
• MD: To record from the optional
component connected to the MD jacks.
3 Press z REC PAUSE/START.
“REC” appears and the tape deck stands by
for recording.
4 Press z REC PAUSE/START, then start
playing the desired source to record.
Recording starts.
Other operations
Tip
For recording from a CD, you can press ./> to
select tracks during recording pause mode (after step 3
and before step 4).
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press x.
Pause recording Press z REC PAUSE/START.