Filter
Top Products
RANDOM /REPEAT PLAY
Use the remote control,
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display,
REPEAT play — % lights up on the display.
RANDOM/REPEAT play — RANDOM and ~ light upon the
display.
Cancel — RANDOM and C& disappear from the display.
To ~lav all discs, press ~ to start play.
To play a single disc, press one of DISC DIRECT PLAY 1-3 to
start play.
m
During random play it is not possible to skip to the previously
played track with +,
1 Press CD BLANK SKIP.
“CD BLANK SKIP ON” is displayed and a small dot will appear
in the display.
Small dot
2 Press F to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion also will be skipped.
To return to normal playback
Press CD BLANK SKIP again, and the dot in the display will
disappear.
m
“
There may be a case where BLANK SKIP PLAY does not
function correctly.
“ BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING (page 18), PROGRAMMED EDIT
RECORDING (page 19), or recording during PROGRAMMED
PLAY (page 15) or RANDOM PLAY (page 15).
upto 30
discs.
tracks can be programmed from any of the inserted
1
2
2
5
44,*
■
Use the remote control.
1
2
3
4
5
Press PRGM twice in stop mode.
“PRG” is displayed
● When the PRGM is pressed once in step 1, the unit enters
the KARAOKE PROGRAM (page 23).
Press DISC DIRECT PLAY, then press numbered
buttons 1-3 within 3 seconds to select a disc.
Go to the next step when the tray stops rotating.
Press numbered buttons O-9 and +1Oto program
a track.
Example:
To select the 25th track, press +10, +10 and 5,
To select the 10th track, press +10 and O.
Total number of
Selected track number
Program number
selected tracks
Total playing time of
the selected tracks
Repeat steps 2 and 3 to program other tracks.
Press - to start play.
To check the program
Each time - or - is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
■ CLEAR in stop mode,
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until CL appears on the display.
● During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track, “CAN’T
USE” is displayed if you attempt to select a track.
● “FULU is displayed if you attempt to program more than 30
tracks.
ENGLISH 15