Filter
Top Products
9
Programmed play
Plays back up to 30 selected tracks in programmed order.
1
In stop mode, press SHUFFLE/PROGRAM on the
remote repeatedly so that "PRGM" indicator is
displayed.
2
Press the numbered buttons on the remote to
program a track.
-To select the 15th track, press >10, 1 and 5.
-To select the 20th track, press >10, 2 and 10/1.
The selected track number lights up on the display.
3
Repeat step 2 to program other tracks.
The total number of selected tracks and total playing time
will be displayed.
4
Press E CD to start play.
The track number for the current track flashes on the
display.
•During programmed play, you cannot select a track with the
numbered buttons.
•If the total playing time of the program exceeds 99 minutes
and 59 seconds, or if a track with a track number exceeding
30 is programmed, the playing time is displayed as
"- -:- -".
•You cannot program more than 30 tracks. "FULL" is
displayed.
To clear a track
Press CLEAR on the remote in stop mode. Each time you press
the button, a track is cleared from the end of the program.
To clear the program
Press s in stop mode.
To add tracks to the program
Repeat step 2 before starting playback. The tracks are added
to the end of the program.
To cancel programmed play
Press SHUFFLE/PROGRAM repeatedly until "PRGM"
disappears.
•The program contents are retained even if the program
cancelled or after programmed playback finishes. The same
program plays back if you carry out step 1, 2 and 4.
Notes on CDs
•Do not place more than one disc.
•Do not tilt the unit with a disc loaded.