Filter
Top Products
BASIC OPERATIONS
Deck 2
● On deck 1, tapes are always played back on both sides.
On deck 2, you can select a reverse mode to play back one or
both sides.
● Use Type I (normal), Type 11(high/CrOz) or Type IV (metal)
tapes for playback.
7 Press the TAPE button and press the 4 EJECT
mark to open the cassette holder.
4 EJECT-
U
1
Insert a tape with the exposed side down. Push the cassette
holder to close.
2 Press the + E button to start play.
The tape counter indicates
Playing deck number the tape running length.
Playback side indicator
-: The front side is being played (forward).
+: The back side is being played (reverse)
To select a reverse mode (deck 2 only)
Each time the REV MODE button is pressed, the reverse mode
changes.
Z+I)+C=)J
When tapes are loaded in both decks
Press the TAPE button first to select a deck.
The selected deck number is displayed.
To stop play, press the
■ button.
To pause play (deck 2 only), press the 11 button. To resume
play, press again.
To change the playback side, press the 4
➤ DIRECTION/
PRESET button in play or pause mode.
To fast forward or rewind, press the + or - button. Then
press the Z button to stop the tape.
To
start play when the power is off (Direct Play Function)
Press the TAPE button. The power k turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press the N CLEAR button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
If a television is used near this unit during tape playback, noise
may be heard from the speakers. In this case, turn the television
off.
To play one side only, select =.
To play from front side to reverse side once only, select 1).
To play both sides repeatedly, select C).
● When tapes are loaded in both decks, =) on the display
indicates Continuous Play.
I 1 ENGLISH