Filter
Top Products
Insert a tape with the side to be recorded facing
out.
Get ready to record from the
source.
To record from a CD, press CD and load the disc.
To record from a radio broadcast, press RADIO/
BAND and tune to a station.
NOTE (CSD-ED67 only)
Make sure that ~ of the OPE/BATT/DIR indicator is on.
If it is not on, press DIR to turn it on.
Press
● REC to start recording,
4* PLAY or 4 PLAY is pressed simultaneously.
When the selected function is CD, CD play and
recording starts simultaneously,
For CSD-ED67, REVERSE MODE is also pressed
simultaneously. At the end of the tape, it reverses to the
back side although recording stops (the deck enters play
mode).
Press WA STOP/EJECT to stop the tape and press
■
STOP/MEMORY to stop CD play.
To record only the selected tracks of a CD
1 Follow steps 1 to 3 of PROGRAMMED PLAY on page 5
to program tracks.
2 Press
● REC.
To stop recording, press WA STOP/EJECT.
When recording from a CD, play pauses. To stop CD play,
press W STOP/MEMORY.
To pause recording, press II PAUSE. To resume
recording, press again.
To erase recording, press
● REC while the power is off.
After recording, press POWER (!) STANDBY to turn the
power off.
To prevent accidental erasure
Break off the plastic tabs on the cassette tape with a
screwdriver or other pointed tool after recording.
To record on the tape again
Cover the tab openings with adhesive tape, etc.
Side A
m
“OO(! ~
\
4
Tab for side A
ENGLISH
7