Filter
Top Products
MODE
REPEAT
- PLAY
H+, m
■ STOP
1
2
3
Press CD.
The power is turned on and the CD indicator lights up.
Press OPEN to open the disc compartment.
Place a disc with the printed side up and
close the disc compartment.
Total number of tracks and total playing time are
displayed.
Press’- II PLAY/PAUSE/PRESET to start
play.
The number of the track being played and elapsed
playing time are displayed.
* or F PLAY on the remote control (except CSD-
ED37)
■ STOP/MEMORY – Stops play.
‘>lE PLAY/PAUSE/PRESET – Pauses play. To resume
play, press again.
‘ or II PAUSE on the remote control (except CSD-
ED37)
K+, FM SKIP/SEARCH – Searches for a particular point
during playback. Keep H or
➤Pl pressed and then
release it.
– Skips to the beginning of a track. Press 14 or FM
repeatedly.
‘REPEAT/FM MODE/OSC – Repeats a single track or all
tracks. Select as follows.
C 1: A single track is played repeatedly. Select a track
with 144 or
➤>1.
C : All tracks are played repeatedly.
* or REPEAT on the remote control (except CSD-ED37)
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
If you load a disc while the CD indicator flashes in step 2,
play starts without pressing -11.
To select a track directly with the remote control (except
CSD-ED37), press the numbered buttons O-9 and +1 O. CD
play starts from the selected track and continues to the last
track.
Example:
To select number 25, press +10, +10 and 5.
To select number 10, press +10 and O.
After listening, press POWER (!) STANDBY to turn the
power off.
NOTE
● Do not use irregular shape CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
● Do not place more than one disc in the disc compartment.
● Do not try to open the disc compartment during play.
● Do not touch the lens. Doing so may cause malfunctions.
Up to 30 tracks can be programmed from the disc.
~
In stop mode, keep’= STOP/MEMORY
pressed until “M” flashes in the display.
‘
or ■ on the remote control (except CSD-ED37)
2
3
4
Press W, >>1 to select a track, then press
H STOP/MEMORY to store it.
Track number
Programmed number
To select a track with the remote control (except
CSD-ED37)
Press the numbered buttons O-9 and +1 O.
Repeat step 2 to program other tracks.
Press -II to start play.
To check the program, press ~< or ~ in stop mode.
To clear the program, press
■ once in stop mode so that
“M” disappears in the display.
To change the programmed tracks, clear the program and
repeat all the steps again.
ENGLISH 5