Filter
Top Products
5
En
Main unit: rear
1 CD DIGITAL OUT (OPTICAL) jack
Outputs CD digital sound signals to digital audio
equipment. Remove the dust cap and connect using an
optional optical cable plug. When this jack is not being
used, attach the supplied dust cap.
2 MW/LW LOOP, FM 75 Ω terminals
Plug in the supplied MW/LW and FM antennas here.
3 VIDEO/AUX jacks
Accepts analog sound signals from external equipment.
Connect using an optional connecting cable with RCA
phono plugs (red plug to R jack, white plug to L jack).
Refer also to the operating instructions of your equipment.
To switch function to external input, turn the Dial Function
(see "ADJUSTMENTS BEFORE OPERATIONS") to select
the VIDEO/AUX function.
Tip:
To change the displayed name for this function, select
the VIDEO/AUX function, then hold down ENTER and
press POWER on the unit. Repeat the procedure to select
"AUX ", "VIDEO " or "TV ".
4 SPEAKERS3 terminals
Connect the speaker cord of the supplied front speakers
here.
5 AC power cord
PARTS AND CONTROLS
Dynamic Integrated New Amplifier
is a brand-new amplifier system where clear mid-to-high range
frequency sound, as well as rich low frequency sound, can be
reproduced and listeners can enjoy the close-to-original sound
with less distortion at either high or low volume levels.