Filter
Top Products
14
En
PTY Search
The unit can search for a station broadcasting your desired PTY
easily. To do so,
you need to preset every available station in
advance since the unit searches only the preset stations.
1
Press PTY.
2
Press f or g to select a desired program
type and then press PTY.
The search begins, stops when a suitable station is
detected, and the unit tunes it in.
"NO DA TA" is displayed if a suitable station is not found,
and the unit returns to the previous station.
If there is no button input for 4 seconds in step 2, the
search is not activated.
•MULTI JOG is also available in place of f or g.
Tip:
If TRAFFIC (PTY) is selected , the unit searches for a station
which
regularly broadcasts traffic announcements. Therefore,
a detected station may not be currently broadcasting traffic
announcements. You will, however, be able to hear the
announcements in a while.
EON Search
The unit can leap to a station which has just started broadcasting
your desired PTY.
In EON (Enhanced Other Networks information) Search, the
unit is in standby mode until the desired PTY begins. As soon
as it begins, the unit "leaps to" another station with the PTY
and returns to the previously tuned station when it ends. EON
Search makes the function above possible with the help of
EON which gives the receivers a cross reference to other stations.
You need to preset every available station in advance since the
unit searches only the preset stations.
1
Tune in an RDS station.
If "EON " lights up, proceed to the next step.
If not, try to tune in another RDS station until it does.
2
Press PTY to display the program type.
3
Press f or g to select a desired program
type and then press a.
"EON ON " is displayed for 3 seconds and then the unit
enters the standby mode while "EON " flashes. When the
unit leaps to another station, "EON " flashes rapidly.
If there is no button input for 4 seconds in step 3, the
search is not activated.
•MULTI JOG is also available in place of f or g.
To return to the previously tuned station from the
"leaped to" station
Press d. The standby mode for EON Search is also
cancelled.
To cancel the standby mode for EON Search
Hold down PTY for a while so that "EON PTY " and the
selected PTY are displayed alternately, and then with PTY held
down, press a. "EON OFF " is displayed.
•The standby mode for EON Search will not be cancelled
even if the unit is turned off.
Note on PTY & EON Search
PTY & EON Search do not function under the following
conditions:
- FM stations are not preset.
- The signals of the station broadcasting the desired PTY are
weak.
- FM RDS stations cannot be received.