Filter
Top Products
ELECTRONIC GRAPHIC
EQUALIZER
This unit provides the following five different equalization modes.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ: Accented lower frequencies for jazz-type music
CLASSIC: Enriched sound with heavy bass and fine treble
BGM: Calm tone with suppressed bass and treble
Press one of the GEQ (Graphic Equalizer) buttons.
The selected mode name appears on the display for two seconds,
and the selected mode on the right side of the display is enclosed
with parentheses.
Selected mode —~
To cancel the selected mode
Press the selected button again. “GEQ oFF appears on the
display.
To select with the remote control
Press the GEQ button repeatedly until the desired equalization
mode is displayed.
DSP SURROUND
DSP DOWNV UPA
DSP
e3
I
MANUAL SELECT
LA
The DSP (Digital Signal Processor) surrcmnd circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments. There are four modes with
matching graphic equalization modes. Equalization modes are
selected automatically and can also be selected or turned off to
suit your preference.
Press one of the DSP buttons (DANCE, LIVE, HALL
or ARENA).
The selected mode name appears on the display for two seconds,
and the selected DSP and matching GEQ modes on the display
are enclosed with parentheses.
Q mode
m
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE
or HALL is selected, no sound will be heard from the surround
speakers.
To cancel the selected mode
Press the selected button again. “DSP oFF appears on the
display. Even if canceling the selected DSP mode, the matching
or selected GEQ mode still remains. While the DSP surround
system is off, no sound is heard from the surround speakers.
To select with the remote control
Press the DSP button repeatedly until the desired DSP mode is
displayed.
To adjust the volume of the surround spe!akers
Press the MANUAL SELECT button once. “SIJR” is displayed
forfour seconds. Press the UPA or DO\NNV buttonwhile “SUR”
is displayed.
Note that the Dolby Pro Logic surround speakers level is also
changed (see page 13).
m
The DSP system is automatically canceled when the DOLBY
PRO LOGIC is turned on.
ENGLISH 8