Filter
Top Products
10
ENGLISH
SELECTION OF VIDEO SOURCE
While selecting a program source which does not contain video
input (such as a CD player), you can select a video source
separately to be viewed on the TV.
1 Press FUNCTION repeatedly to select FM, AM, CD,
AUX or TAPE.
2 Press TV/VIDEO.
3 Press JOG
++
++
+,
--
--
- repeatedly.
The video source to be output through the MONITOR VIDEO
OUT jack changes in the following order.
M-OUT V1 M-OUT V2 M-OUT DVD
M-OUT V1: Video image of the equipment connected to the
VIDEO 1/MD terminals can be viewed on the TV.
M-OUT V2: Video image of the equipment connected to the
VIDEO 2/LD/TV terminals can be viewed on the TV.
M-OUT DVD: Video image of the equipment connected to the
DVD terminals can be viewed on the TV.
TO CHANGE A DISPLAYED NAME FOR
THE VIDEO 1 AND VIDEO 2 FUNCTION
When the VIDEO 1 function is selected, VIDEO 1 is displayed
initially. It can be changed to MD.
While pressing ENTER, press INPUT MODE.
The displayed name for the VIDEO 2 function can be changed to
VIDEO 2, LD or TV. Select VIDEO 2 function.
While pressing ENTER, press INPUT MODE.
TO SELECT “ANALOG” OR “DIGITAL”
MODE OF THE DVD, VIDEO 1 OR VIDEO 2
FUNCTION
Press INPUT MODE when the DVD, VIDEO 1 or VIDEO 2 function
is selected. The selected mode “ANALOG” or “DIGITAL” appears
on the display.
In DIGITAL mode: Equipment connected to the DIGITAL IN
OPTICAL (DVD) terminal is selected as a source for the DVD
function, equipment connected to the DIGITAL IN OPTICAL
(VIDEO 1) for the VIDEO 1 function, and equipment connected
to the DIGITAL IN COAXIAL (VIDEO 2) for the VIDEO 2 function.
In ANALOG mode: Equipment connected to the DVD terminals
is selected as a source for the DVD function, equipment
connected to the VIDEO 1/MD for the VIDEO 1 function, and
equipment connected to the VIDEO 2/LD/TV for the VIDEO 2
function.
SELECTION OF AUDIO/VIDEO
SOURCE
FUNCTION
FUNCTION
ENTER
TUNING
INPUT MODE
JOG +,-
TV/VIDEO
INPUT
MODE
1Turn FUNCTION to select the program source.
The function changes in the following order.
FM AM DVD CD
AUXTAPEVIDEO 1VIDEO 2
The actual source selected (except FM and AM) depends on
the equipment connected to the input terminals on the rear
panel of the unit.
For example, if an MD player is connected to the VIDEO 1/
MD terminals, select VIDEO 1 to listen to the MD playback
sound.
To select with the remote control
Press FUNCTION repeatedly.
2Start the selected program source.
3 Adjust the sound.
BASIC OPERATIONS