Aiwa TS-W150 Speaker User Manual


 
5
En
Note
Do not plug in the AC power cords of both TS-W150 and the
epuipment to the AC power outlets before all other connections
are made.
Preparations
Turn off the power of the equipment and remove the speaker
cords from the speaker terminals on the equipment.
1
Connect the speaker terminals on E the
equipment to the INPUT 2 (FROM SPEAKERS
OUT) terminals on STS-W150 with Cthe
supplied speaker cords.
• Make sure the L and R and the ) and (cords
are connected correctly.
2
With the speaker cords removed from the
equipment (see “Preparations” above), connect
R the right and L left speakers to the SPEAKERS
OUT terminals on STS-W150.
3
Set the INPUT SELECT switch to “2”.
4
Connect the AC power cord to an AC outlet.
Note
Use left/right speakers whose impedance corresponds with
the value specified on the equipment.