Filter
Top Products
15
En
Side A
Tab for side A
8
Hold down SHIFT and press CD EDIT/CHECK once
to switch back to side A.
9
Press REC/REC PAUSE once.
The tape is rewound to the beginning of side A. "REC
MUTE " flashes on the display and the lead segment is
played through for 10 seconds, and recording starts.
Go to the next step when recording on side A finishes.
On the remote control, hold down SHIFT and press REC/
REC PAUSE to start recording.
10
Hold down SHIFT and press CD EDIT/CHECK once
to switch to side B.
11
Turn over the tape and press REC/REC PAUSE
once.
Recording on side B starts in the same way as side A.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1Before recording, hold down SHIFT and press
CD EDIT/CHECK on the remote control to select side A or
B.
2 Press f or g repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Hold down SHIFT and press CD EDIT/CHECK on the remote
control to select side A or B, and press s to clear the program
for the selected side. Then, select tracks again.
To clear the edit program
Press s twice.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.