Aiwa NSX-AJ500 Stereo System User Manual


 
10
En
This unit plays back finalized CD-R/RW discs as well as audio
CDs.
Playback
1
Press CD and load disc(s)
Press zOPEN/CLOSE to open the disc compartment and
place one or two disc(s) with the labeled side up.
To place three discs, press DISC CHANGE so that the trays
rotate, then place the third one. Lastly, close the
compartment with zOPEN/CLOSE.
When loading an 8-cm (3-inch) disc, place it on the
inner circle of the tray.
2
To play all discs, press c.
To play one desired disc, press DISC DIRECT
PLAY 1-3.
To stop playback
Press s.
To pause playback
Press a. Press again to resume playback.
CD OPERATIONS
To replace disc(s) during playback without
interruption
While one disc is being played back, press DISC CHANGE so
that the compartment opens, replace disc(s) with other one(s),
and press DISC CHANGE to close the compartment.
Random/Repeat playback
Random playback plays all the tracks on one desired disc or all
the discs in random order. Repeat playback plays all the tracks
repeatedly on one desired disc or all the discs.
1
Press SHIFT+RANDOM/REPEAT repeatedly on
the remote control to select one of the following
modes:
- Random playback: "RANDOM" lights up.
- Repeat playback: "
"
" lights up.
- Random and repeat playback: "RANDOM" and "
"
"
lights up.
2
To play one desired disc, press DISC DIRECT
PLAY 1-3.
To play all discs, press c.
To cancel random/repeat playback
Press SHIFT+RANDOM/REPEAT repeatedly on the remote
control so that both "RANDOM" and "
"
" disappear on
the display.
To repeat a selected set of tracks
Select the tracks with programmed playback, then press
SHIFT+RANDOM/REPEAT on the remote control to select
repeat playback.
It is impossible to play a selected set of tracks in random
order.
To skip to the beginning of the current/preceding/
succeeding track
Press f or g repeatedly or turn MULTI JOG.
To search (playback in fast forward or fast reverse)
Hold down f or g. Release at the desired point.
To select a track with the remote control
Press DISC DIRECT PLAY 1-3 to select a disc and then press
the numbered buttons to select a track.
- To select track 25, press +10, +10 and 5.
- To select track 10, press +10 and 0.
To display the remaining playback time of the CD
Press SHIFT+CD EDIT/CHECK on the remote control. Press
again to return to the elapsed time display.
Remaining playback time cannot be displayed during
random playback or programmed playback.
01NSX-AJ500/AJ503(U)/Eng 12/22/00, 3:51 PM10