Filter
Top Products
This section explains how to record from the tuner, CD player, or
external equipment.
“--*1
Preparation
● Use Type I (normal) tapes only.
● Set the tape to the pointwhere recording willstart.
● Note that recording is done on only one side of the tape.
1
2
3
Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
L
- A EJECT
Press function (CD, TUNER, VIDEOIAUX or MD)
and prepare the source to be recorded.
To record from a CD, press CD and loadthe disc(s).
To record from a radio broadcast, press TUNER and tune
into a station.
To record from a connected source,
press VIDEO/AUX or
MD.
Press ● REC/REC MUTE to start recording.
When the selected function is CD, playback and recording
start simultaneously.
When recording from a connected source, start playback of
the source.
To stop recording, press W.
To pause recording, press II. (Applicable when the source is
TUNER, VIDEO/AUX orMD) Toresume recording,press itagain.
Sound adjustment during recording
The output volume and tone (except BBE) of the speakers or
headphones are freely varied without affecting the level of the
recording.
, ~ ... “. ,.,, .,- . ..=....,. ,;, ; ,,, . . . .. .. . ,, ”.,., ,.
INSERTING BLANK ‘SPACES
M
,8;,,
Insertion of 4-second blank spaces enables you to activate the L .;,,
!$
Music Sensor function. (Applicable when the source is TUNER, &@~
VIDEO/AUX or MD.)
,=*: ;.
1 Press ● REC/REC MUTE during recording or while in
?#
recording pause mode.
/,?
~
on the display flashes for 4 seconds and 4-second blank ‘~”
space is made. Then, the deck enters the recording pause +
mode.
2
Press II to resume recording.
*I,
;*j
To insert a blank s~ace of less than 4 seconds,
press @
:~qjj
REC/REC MU-rE again while w is flashing.
~
,:.p.-$.,
To
insert blank spaces of more than 4 seca~, after the deck $. ,“?
enters recording pause mode, press 0 REC/’REC MUTE again.
‘:#;
Each time the button is pressed, a 4-second blank space is added.
*
About cassette tapes
● To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
e
e?!!.
,
.L($ii=‘
Side A-
Tab for side A
Ilk
To record cm the tape again, cover the tab openings with
adhesive tape, etc.
● 120-minuteor longer tapes are (extremely thin and easily
deformed cwdamaged. They are not recclmmended.
● Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
$$
) ;=~-
/
\a fz
(?
(
To
erase a recording
Make sure the microphone is not connected to this unit.
1 Insert the tape to be erased into deck 2 and press TAPE DECK
1/2 to display “TP 2“.
2 Set the tape to the point where the erasure is to be started.
3 Press
● RIEC/REC MUTE to start the erasure.
ENGLISH I ~