Aiwa CSD-ED67 Stereo System User Manual


 
MODE
REPEAT
- PLAY
H+, m
STOP
1
2
3
Press CD.
The power is turned on and the CD indicator lights up.
Press OPEN to open the disc compartment.
Place a disc with the printed side up and
close the disc compartment.
Total number of tracks and total playing time are
displayed.
Press’- II PLAY/PAUSE/PRESET to start
play.
The number of the track being played and elapsed
playing time are displayed.
* or F PLAY on the remote control (except CSD-
ED37)
STOP/MEMORY Stops play.
‘>lE PLAY/PAUSE/PRESET Pauses play. To resume
play, press again.
or II PAUSE on the remote control (except CSD-
ED37)
K+, FM SKIP/SEARCH Searches for a particular point
during playback. Keep H or
Pl pressed and then
release it.
Skips to the beginning of a track. Press 14 or FM
repeatedly.
‘REPEAT/FM MODE/OSC Repeats a single track or all
tracks. Select as follows.
C 1: A single track is played repeatedly. Select a track
with 144 or
>1.
C : All tracks are played repeatedly.
* or REPEAT on the remote control (except CSD-ED37)
To start play when the power is off, press CD. The
power is turned on and play of the loaded disc begins
(Direct Play Function).
If you load a disc while the CD indicator flashes in step 2,
play starts without pressing -11.
To select a track directly with the remote control (except
CSD-ED37), press the numbered buttons O-9 and +1 O. CD
play starts from the selected track and continues to the last
track.
Example:
To select number 25, press +10, +10 and 5.
To select number 10, press +10 and O.
After listening, press POWER (!) STANDBY to turn the
power off.
NOTE
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones).
It may result in malfunctions.
Do not place more than one disc in the disc compartment.
Do not try to open the disc compartment during play.
Do not touch the lens. Doing so may cause malfunctions.
Up to 30 tracks can be programmed from the disc.
~
In stop mode, keep’= STOP/MEMORY
pressed until “M” flashes in the display.
or on the remote control (except CSD-ED37)
2
3
4
Press W, >>1 to select a track, then press
H STOP/MEMORY to store it.
Track number
Programmed number
To select a track with the remote control (except
CSD-ED37)
Press the numbered buttons O-9 and +1 O.
Repeat step 2 to program other tracks.
Press -II to start play.
To check the program, press ~< or ~ in stop mode.
To clear the program, press
once in stop mode so that
“M” disappears in the display.
To change the programmed tracks, clear the program and
repeat all the steps again.
ENGLISH 5