Filter
Top Products
Left Front
Right Surround
Right Back
Left Back
Left Surround
Center
Right Front
current phase angle or the reactance of the loudspeakers
which the amplier is driving. Sometimes, when the
amplier is in use, the LEDs may occasionally icker
during high volume listening, particularly if you are driving
low impedances. This ickering is no cause for concern.
The LEDs are simply warning you that the amplier is
approaching its maximum power output into the particular
loudspeakers you are using. If, however, the Distortion
Alert LEDs glow brightly or are illuminated most of the
time during playback, you are over driving the amplier
and should turn down your volume control to reduce
the listening level, otherwise it may cause the Thermal
Protection to be activated or, in extreme cases, damage
your loudspeakers.
WARNING
WHENEVER CONNECTIONS TO OR FROM
THE GFA-7605 & GFA-7607 ARE BEING
MADE, BE CERTAIN THAT THE AC ON/OFF
SWITCH OF THE AMPLIFIER IS IN THE
OFF POSITION, THE AC CORD OF THE
AMPLIFIER IS DISCONNECTED FROM THE AC
WALL OUTLET AND THAT ALL ASSOCIATED
COMPONENTS ARE OFF.