Filter
Top Products
Bu t t o n S & Ja c k S
7
On/Off switch
(right
headphone,
bottom)
Using the Wireless Headphones
Turning the Headphones On
1. Make sure the transmitter is
plugged in and connected to an
audio source.
2. Put the On/Off switch on the
right headphone in the On
position. The indicator on the
right headphone lights up red to
show that the headphones are
on.
Indicator
(right headphone,
side)
3. Switch on the audio source (TV, DVD, CD player, etc.) the
transmitter is connected to. If your audio source is a DVD or CD
player, start a disc.
The headphones and transmitter should tune automatically in a
matter of seconds—the transmitter’s On light and the headphone’s
indicator both turn solid green when tuned.
4. If you’re using a variable-level audio output (something you can
set the volume on), adjust the volume on your audio source. Then
adjust the volume using the Volume wheel on the right earphone.
Turning the Headphones Off
Put the On/Off switch in the Off position. Don’t forget to unplug the
transmitter too!