Acoustic Research AW877 Speaker System User Manual


 
4
Connecting to a Stereo or Computer
Plug the cable coming out of the transmitter
into the headphone output of your stereo or the
audio output jack on your computer. Use the
included 1/4” headphone adapter to convert the
3.5mm plug to a 1/4” plug as needed.
Transmitter
Stereo
1/4” headphone
adapter
Audio Input Cable
Connecting to a TV
1. Connect the included “Y” adapter cable to
the 3.5mm mini-plug cable coming out of
the transmitter.
2. Connect the left (white) and right (red)
audio plugs on the “Y” adapter cable to the
corresponding left and right audio outputs
on the TV.
Transmitter
Audio Input Cable
“Y” adapter cable
TV
Audio Output
Connecting the Speaker System
Powering the Transmitter
Connect the small, round plug from the transmitter AC power adapter to the
transmitter’s power input jack. Plug the other end of the transmitter AC power
adapter into any standard 120V AC wall outlet.
Note: Be sure to use the AC power adapter rated
12V DC 100 mA.
Note: There is no transmitter ON/OFF switch.
The transmitter is designed to be left plugged in
and powered at all times. If you will not be using
the AW877 for an extended period of time, unplug
the transmitter AC power adapter.
Transmitter
AC Power
Adapter
120V AC
wall outlet
Connecting to an Audio Source
Connecting to an A/V Receiver
1. Connect the included “Y” adapter cable to
the 3.5mm mini-plug cable coming out of
the transmitter.
2. Connect the left (white) and right (red)
audio plugs on the ”Y” adapter cable to the
corresponding left and right audio outputs of
your A/V receiver, amp or other audio source.
Transmitter
A/V Receiver
Audio Input Cable
“Y” adapter cable
Audio Output