Acoustic Research AW-871 Speaker System User Manual


 
4
III. Powering the Speakers
There are two options to power your wireless speakers:
i. AC Power Adapter:
AW811
AW871
Battery
Battery
Battery
Battery
Battery
Battery
Battery Battery
Audio Output
Audio Output
Audio Output
Audio Output
Sortie audio
Sortie audio
Warning: This product is designed to work with line level outputs or
headphone outputs only. DO NOT connect it directly to speaker outputs, as
it will permanently damage the transmitter.
Important:
If you are using NiMH or NiCd batteries, the batteries will charge when the
headphones are powered with the AC power adapter. Do not power the head-
phones with the AC power adapter if you installed alkaline or other non-re-
chargeable batteries—this could cause the batteries to leak. Do not mix batter-
ies with different chemistry types (for example, a zinc battery with an alkaline
battery). Do not mix new and used batteries. Do not leave batteries installed in
the product when not in use for long periods.
1. Turn the speaker volume down by
rotating the power/volume/scan
control (C) on the front of the
speaker all the way to the left.
2. Insert the small, round plug from
one speaker AC power adapter (M)
into the speaker power input jack (E).
3. Plug the other end of the speaker
AC power adapter into any
standard 120V AC wall outlet.
Note: Be sure to use the speaker
AC power adapters rated 18V DC
700 mA.
1. Turn the speaker volume down by
rotating the power/volume/scan
control (C) on the front of a
speaker all the way to the left.
2. Remove the battery compartment
cover (D) on the rear of a speaker.
3. Insert eight (8) C-cell batteries (not
included) into the speaker
following the polarity (“+” and
“–”) as diagrammed inside the
battery compartment.
4. Replace the battery compartment
cover.
ii. C-cell Batteries:
AW811
AW871
Battery
Battery
Battery
Battery
Battery
Battery
Battery Battery
Audio Output
Audio Output
Audio Output
Audio Output
Sortie audio
Sortie audio
Speaker
Speaker power
input jack (E)
AC Power
adapter (M)
Battery
compartment
cover (D)