Filter
Top Products
15
“Disc Error” or “No • dirty or heavily scratched CD disc • clean the CD disc
Disc” is shown • wrong disc type • replace with a proper CD disc
Disc spinning • dirty or heavily scratched CD disc • clean the CD disc
erratically • CD puck improperly attached • replace CD puck properly
No power when the • poor or no power plug connection • insert the power plug firmly into the AC
power button is set at power point
to ON • blown fuse at mains plug • change mains plug fuse
No sound • incorrect audio cable connections • ensure the CD-777 is correctly connected
• incorrect operation of Amplifier • ensure input selector on the amplifier is set to
CD-777
Remote control • batteries in remote control handset • replace batteries
does not work have expired
• object obscuring remote sensor • remove any objects directly in front of the
on the CD-777, no “line of sight” CD-777
• Interference from fluorescent lights • turn off fluorescent lights or redirect the
light away from the CD-777
A “humming” sound • loose cable connections • re-attach the loose cables correctly
can be heard
Other problems • go to the Contents section and re-trace
the procedure or contact your nearest AMR
distributor/dealer
Appendix A - Troubleshooting
Symptom Possible cause Solution