Filter
Top Products
11
3.1.6 Numeric Pad (RCD-777 only)
This encapsulates the numbers 0-9 on the numeric pad. By pressing any combination of the
numeric keys, a desired track may be selected directly.
For example, to select Track 2, press 2; to select Track 21, press 2 and then 1.
3.1.7 DAC Input (RCD-777 only)
The DAC button (RC4) is for the replay of music on the CD-777 from music stored on a computer
hard-drive via a USB-to-USB cable connection or any external digital source equipped with an
electrical S/P-DIF output.
To establish the connection between the CD-777 and an S/P-DIF source:
i. Power ON the CD-777.
ii. On the RCD-777 press the DAC button (RC4) to place the CD-777 in DAC mode.
iii. Power ON the S/P-DIF source.
iv. Connect the S/P-DIF cable between the CD-777 and the source.
To establish the connection between the CD-777 and a computer USB source:
i. Power on the CD-77.
ii. On the RCD-777, press the DAC button (RC4) to place the CD-777 in DAC mode.
iii. Power ON the personal computer.
iv. Connect the USB cable between the CD-777 and the personal computer.
v. Go to Control Panel > System > Hardware > Device Manager. In Device Manager
wait until the personal computer has recognised the CD-777 as a USB Audio Device.
To use the S/P-
DIF connection
the USB
connection
must be
disconnected