Filter
Top Products
E-6
A18
connections
Note
Please read the ‘Placing the unit’, ‘Power’ and
‘Interconnect cables’ sections on page 5 before
connecting up your A18 integrated amplier!
Audio connections
e labels above the connectors give suggested
audio inputs, although any suitable device may be
connected to the line-level inputs. (Note, however,
that the name of the input shown on the front-panel
display cannot be changed.)
DVD, SAT , TUNER and CD are all line-level inputs. e
PHONO MM input has dierent characteristics – see
page 12 for the specication.
In addition to the line level inputs, the AV and PVR
connectors both have line level outputs for use in
recording from other sources.
See page 7 for more information.
Pre-amplier connection
is socket is only used if you are using
the A18 as a pre-amp, for example, when
using the A18 in conjunction with a P38
in a bi-amplied system.
See page 8 for more information.
Speaker terminals
See page 8 for information on
connecting loudspeakers.
Power inlet
Connect the correct
mains cable here.
Voltage select
Ensure that the voltage selected
matches your local power supply.
Phono earth terminal
For connecting your turntable
earth lead, if required. Note that
this terminal must not be used as a
safety earth.
Aux input
Analogue 3.5mm stereo jack socket,
intended for connecting a portable
MP3 player.
Phones
3.5mm stereo jack socket,
intended for use with a set of
headphones.