Filter
Top Products
E-12
Continuous power output (20Hz—20kHz at 0.5% THD), per channel
Both channels, 8
Ω, 20Hz—20kHz 50W
Single channel, 4
Ω, at 1kHz 70W
Harmonic distortion, 80% power, 8
Ω at 1kHz 0.01%
Inputs
Phono cartridge:
Input sensitivity at 1kHz 2.5—15mV
Input impedance 47k
Ω
Signal/noise ratio (CCIR, 45W) 88dB
Overload margin 31dB
Line and AV inputs:
Nominal sensitivity 250mV—1.5V
Input impedance 22k
Ω
Signal/noise ratio (CCIR, 45W) 98dB
Preamplier output
Nominal output level 630mV
Output impedance <50
Ω
Headphone output
Maximum output level into 600
Ω 7V
Output impedance 100
Ω
General
Mains voltage 110—120V or 220—240V
Power consumption (maximum) 350W
Dimensions W x D x H (including feet) 432 x 275 x 85mm
Weight (net) 7.2kg
Weight (packed) 9.1kg
Supplied accessories mains lead
CR10 remote control
2 x AAA batteries
E&OE
NOTE: All specication values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. is means that designs and specications are
subject to change without notice.
specications