5
ENGLISH
© 3M 2009. All rights reserved.
Product Warranty and Safety Guide3M™ Digital Projector X30N/X35N
3M™ Digital Projector Limited Warranty
Warranty; Limited Remedy; Limited Liability
The 3M Digital Projector (the “3M Product”) is warranted to be free from defects in material or manufacture for a period of
three (3) years from the date of purchase or 2,500 hours of usage, whichever occurs rst.
All other accessories of the 3M Product excluding the projector lamps, but including the wall mounts, ceiling mounts, digital
annotation sensors, and input/output devices are warranted to be free from defects in material or manufacture for a period of
one (1) year from the date of purchase.
The lamp component of the 3M Product is warranted to be free from defects in material and manufacture for a period of ninety
(90) days after the date of purchase of the 3M Product or 180 hours of lamp usage, whichever occurs rst. This warranty is for
parts only and in the case of an approved warranty claim for a lamp; your exclusive remedy will be for a replacement product
shipped to your location.
Optional product upgrades and/or accessories that are not sold as part of any modular conguration are subject to individual
warranties.
THE WARRANTIES STATED ABOVE ARE EXCLUSIVE AND ARE MADE IN PLACE OF ANY AND ALL
WARRANTIES, EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY INDUSTRY PRACTICE OR
CUSTOM OR TRADE USAGE.
In the event the 3M Product fails to conform to the above stated warranties within the applicable warranty period, your
exclusive remedy shall be, at 3M’s option, to replace or repair the 3M Product or to refund the purchase price of the 3M
Product. All replaced parts or products become property of 3M. If the product is repaired, 3M will repair the defective part(s)
with a new or used part(s). If the 3M Product is replaced, 3M will replace the 3M Product with the same or equivalent model
and with a new or refurbished 3M Product. In the case of an approved warranty claim, the replacement 3M Product will
carry only the remaining term of the original 3M Product’s warranty period as stated above. For warranty service, you must
provide proof of the date of the original purchase else the manufacturing code date will be used to establish the start
date of the warranty.
The following are exclusions to the above listed warranty:
a. This warranty does not cover 3M Product that is modied or damaged through improper storage, misuse, abuse, accident,
vandalism, improper installation, neglect, improper shipping, damage caused by acts of war, disasters such as re, ood,
and lightning, improper electrical current, software problems, interaction with non-3M products, or service other than
by a 3M Authorized Service Provider, neglect or mishandling by any person. Normal wear and tear is not covered under
warranty.
b. The 3M Product is designed to operate in the typical indoor environment. This warranty does not cover 3M Product used
outside of the following circumstances:
• 100V-240V AC, 50/60 Hz
• Ofce (or similar) environments with low levels of smoke or air born particulates.
•
Storage conditions: – 20℃ to 60℃ , maximum 40,000 ft.
c. The Air Intake and Exhaust Vent must be clear of obstructions, including any potential blockage or obstructions caused
from a ceiling or other mount. Inadequate air ventilation may cause the 3M Product to malfunction or may cause damage
to the 3M Product which will void the warranty.
d. This warranty does not cover any additional costs including, but not limited to, those associated with removal, cleaning
or installation of the 3M Product, adjustments, (mechanical or electronic) made to the 3M Product or replacing customer
replaceable parts like lamps and air lters.
e. This warranty covers only normal use of the product. 24-hour-per-day or other excessive continual use is not considered
normal use.
f. This warranty does not cover consumables (e.g., fuses), other than lamps and only as set forth below.
g. This warranty is not transferable.
h. 3M is not responsible for warranty service should the 3M label or logo or the rating label or serial number be removed
unless otherwise stated in writing for the purpose of private labeling for partnership requirements.
i. This warranty does not cover postage, insurance, or shipping costs incurred in presenting your 3M Product for warranty
service. Said costs are the customer’s responsibility. If a claimed defect cannot be identied or reproduced in service, the
customer may be held responsible for cost incurred. Should your warranty upgrade include a “change out” service and the
claimed defect cannot be identied or reproduced by the technician, the customer will be responsible for call out costs.
Altitude Temperature Humidity
0-4000 ft. (normal fan speed) 16-29℃ (41-95 ℉) 10% - 80% (non-condensing)
4000-6000 ft. (high fan speed) 16-29℃ (41-77℉ ) 10% - 80% (non-condensing)