PAGE 70
Installer Quick Setup Guide
See the installation and setup guide of the particular TV for more information.
*Note: After installing a Pay-Per-View card, be sure to remove and reconnect the TV/STB
AC power cord.
Instructions for Making a Master TV/STB Setup
1. Connect TV/STB to signal source, connect power cords and turn on.
2. Enter the TV/STB installer menu.
*Note: If this is not a new setup, set Installer item 117 to 001 and press Enter to
reset TV to default condition.
• Set Tuning Band.
Set Installer menu item 003 BAND/AFC to CATV: 001, Broadcast: 000 etc.
• If necessary, set Installer menu item 028 CH OVERIDE to 001.
In addition, set any other installer items as required of your system.
Exit Installer menu.
3. Access the Master TV menus and set the clonable options on the menus to the
desired configurations. Refer to the Clonable Menu Features Chart for the TV.
(Picture, Sound, Time etc.)
4. Do a Channel Search; run Auto Program. (aka EZ Scan.)
5. Enter the Channel Edit menu and delete channels per your requirements.
6. Enter the Channel Label menu and assign ICONs to the channels.
*Note: You can add Channel ICONStypically network logos like ABC, NBC, PBS etc. in
this step. Or, in Step 8, add Channel ICONS or custom text labels for channels which
Icons are available for.
7. Transfer the TV setup. After all menu options and features are set to your
requirements, enter the installer menu. Press ‘2’, ‘5’, ‘5’, ‘MENU’ to start the transfer
of the TV’s setup to the PTC.
After the transfer is complete, the system will exit the Installer menu.
8. Set any Channel Labels as needed.
a. Enter Installer menu.
b. Press ‘2’, ‘5’, ‘4’, ‘MENU’ to enter the menu. In this menu edit the assigned
channel Icons, assign custom text labels for channels and assign labels for active
Aux sources. Press ‘Menu’ to exit.
9. Enter the Installer menu. Set item 028 Ch Overide to 000 and exit menu.
HCS5610XX PTC INSTALLER MENU
117FACT DEFAULT 00X
003 BAND/AFC 00X
028 CH.OVERIDE 001
028 CH. OVERIDE 000
000 INSTALLER SEQ 000
UPN 000-000-000-000 FPGA 09F1
PTC V1.00.000 STB V1.01.00
WXYZ
DIGITAL 19-3
MONO SAPSTEREO
WXYZ
ANALOG 2
MONO
