4-2
SEAT AND SIDE COVERS
REMOVING THE NUMBER PLATE
1. Remove:
• Bolt (number plate)
• Number plate "1"
• The projection "a" is inserted into the band of
the number plate. Pull the band off the projec-
tion before removal.
• Remove the clutch cable "2" from the cable
guide "b" on the number plate.
• The projection "c" on the lower bracket is in-
serted into the number plate. Remove the
number plate by pulling it off the projection.
CHECKING AND REPLACING THE
PROTECTOR
1. Inspect:
•Protector
Wear/damage → Replace.
Affix the protector as shown.
CHECKING AND REPLACING THE
INSULATOR
1. Inspect:
• Insulator
Damage/peeled off → Replace.
• Before affixing the insulators to the side cov-
er, wipe stains etc. off its surface with a de-
greasing agent or the like.
• Make sure that the insulators do not protrude
past the edges of the side covers.
• Affix the insulators in the following order with
the portion "a" overlapping one on another.
• Insulator 1 "1"
• Insulator 2 "2"
• Insulator 3 "3"
• Insulator 4 "4"
• Insulator 5 "5"
• Insulator 6 "6"
• Insulator 7 "7"
• Insulator 8 "8"
• Insulator 9 "9"
4
